Electric Fire Pipe Lift: The Compact Lifting Solution for Fire Pipes, Square Tubes & Boxed Materials
May 21, 2026| What Is an Electric Fire Pipe Lift?
An electric fire pipe lift is a compact, wheeled lifting machine designed to carry long or heavy materials vertically. It is not a permanent installation – you roll it to where you need it, plug it into a standard power outlet, and start lifting.
This lift is built for:
🔥 Fire protection pipes (steel, ductile iron, etc.)
📐 Square and rectangular tubes
🧱 Bricks and masonry blocks
📦 Bags and boxes
It is especially useful on construction sites, for fire sprinkler installers, and in warehouses that need occasional lifting to mezzanines or upper floors.
Technical Specifications
| Parameter | Value |
|---|---|
| Max. lifting capacity | 200 – 350 kg (height‑dependent) |
| Lifting height | 2.5 m – 7 m |
| Fork length | 75 cm |
| Base plate size | 0.91 m × 1.3 m |
| Dead weight | 100 – 170 kg (varies by height) |
| Retracted height (incl. wheels) | 1.75 m – 3.99 m |
| Lifting speed | 15 m/min |
| Control | Pendent (wired) + remote control |
| Wire rope diameter | 6 mm |
| Frame inner material | Black U steel, size #8 |
| Packing | Wooden case for export |
Capacity vs. Height: The Critical Chart ⚠️
The higher you lift, the less weight you can carry. Here is the exact relationship from our technical data:
| Max. Lifting Height | Max. Lifting Capacity |
|---|---|
| 2.5 m – 4 m | 350 kg |
| 4.5 m – 5 m | 300 kg |
| 6 m | 250 kg |
| 7 m | 200 kg |
Practical example:
If your pipe connection point is at 6 meters high, your safe working load is 250 kg – not 350 kg.
Why Choose This Lift Over Other Methods?
| Method | Problem | This Lift's Advantage |
|---|---|---|
| Manual carrying | Back injuries, slow | Remote control, 15 m/min speed |
| Crane / boom lift | Expensive, needs large access | Affordable, fits through doorways |
| Scaffold + pulley | Time‑consuming, unsafe | One‑person operation, stable base |
How to Choose the Right Height Model
Measure the actual lifting height you need – from the ground to the landing point (e.g., mezzanine floor, roof opening, or pipe hanger).
Then add a safety margin of 0.5–1 meter.
| Your Working Height | Recommended Model | Max Load at That Height |
|---|---|---|
| Up to 3.5 m | 4 m model | 350 kg |
| Up to 4.5 m | 5 m model | 300 kg |
| Up to 5.5 m | 6 m model | 250 kg |
| Up to 6.5 m | 7 m model | 200 kg |
Operation & Safety Notes
Control: Both pendent (wired hand switch) and remote control are included. The remote allows you to stand at a safe distance while lifting long pipes.
Speed: 15 meters per minute. To lift to 7 meters takes about 28 seconds. To 3 meters takes 12 seconds.
Wire rope: 6 mm diameter – inspect regularly for wear.
Base stability: The lift weighs between 100 kg and 170 kg. Its base is 0.91m × 1.3m – wide enough for stable lifting. Always place it on firm, level ground.
Frequently Asked Questions
Q: Do I need to install anything in my building?
A: No. This is a mobile machine – not a fixed cargo lift. Roll it in, use it, roll it out. No holes, no pits.
Q: Can I lift pipes longer than 75 cm?
A: Yes, but the forks are only 75 cm long. Longer pipes will overhang. Center the pipe on the forks and use securing straps. We recommend maximum pipe length of 3 meters for safe operation.
Q: How is it shipped?
A: In a wooden export case – safe for sea freight.
Q: What is "retracted height" and why does it matter?
A: It is the total height of the lift when fully lowered (including wheels). For a 2.5m lift model, retracted height is 1.75m – low enough to pass through a standard garage door. For the 7m model, retracted height is 3.99m – you will need a taller doorway or assemble it on site.
Q: Can this lift carry people?
A: No! It for fire pipe, bags, box– not personnel.
Quick Comparison: Fire Pipe Lift vs. Cargo Lift
| Feature | Fire Pipe Lift | Standard Cargo Lift |
|---|---|---|
| Portability | ✅ Wheeled, mobile | ❌ Fixed installation |
| Fork/platform | 75cm forks | Flat platform (e.g., 1.0×1.0m) |
| Max load | 200–350 kg | 500–2000 kg |
| Height range | 2.5–7 m | 2–15 m |
| Best for | Construction sites, pipe installers | Warehouses, permanent use |
Summary – Is This Lift Right for You?
Choose the STONIMAGE Electric Fire Pipe Lift if:
You lift fire pipes, square tubes, bricks, bags, or boxes
Your working height is between 2.5 and 7 meters
You need a portable machine (not a permanent installation)
You want operation with remote control