Galvanized Ladder Lift: 3 Options – Straight, Turning, and Sloped Roof Models
May 14, 2026| Introduction
Different roof types and job sites need different ladder lifts.
STONIMAGE offers three galvanized ladder lift models.
This guide helps you choose the right one.
Quick Comparison
| Model | Best For | Main Feature |
| Straight Model | Flat roofs, vertical walls | Direct up/down lifting |
| Turning Model | Buildings with balconies or eaves | Can go around obstacles |
| Sloped Roof Model | Pitched roofs, tile roofs | Matches roof angle |
1. Straight Model
Use for: flat roof material lifting, wall installation, floor-to-floor transport
Simple design, leans against wall or building
Electric hoist, remote control
2. Turning Model
Use for: jobs with balconies, protruding eaves, or complex building shapes
Ladder or track can change direction
Bypasses obstacles without moving the whole machine
3. Sloped Roof Model
Use for: pitched roofs, tile roofs, solar panel installation on slopes
Adjustable angle to fit roof slope
Anti-slip design, safe on inclined surfaces
How to Choose?
Flat surface, no obstacles → Straight Model
Obstacles in the way → Turning Model
Sloped or tiled roof → Sloped Roof Model
Why STONIMAGE?
√ Factory direct
√ Galvanized for outdoor use
√ Custom sizes available (OEM/ODM)
√ Global support
FAQ
1. What is the maximum lifting height of your galvanized ladder lifts?
It depends on the model. Different heights are available.
Please contact us with your working height, and we will recommend the right one.
2. Is the ladder lift easy to install?
Yes. All models are designed for simple on-site setup. No special tools are needed. Detailed instructions are provided.
3. Do you offer custom sizes?
Yes. We provide OEM/ODM service. Height, length, and capacity can be customized. Tell us your requirements, and we will send a drawing.
4. What materials are available for the ladder lift?
We offer three material options:
Galvanized steel tube (good for outdoor use and rust resistance)
Channel steel (stronger for heavy loads)
Aluminum (lightweight)
Contact us to choose the best material for your job
5. What maintenance is required?
Basic maintenance: check bolts, keep tracks clean, and store in a dry place when not in use. A full manual is provided with each machine.